Replacement pannier to frame lock for all Hepco and Becker panniers. This is the lock at the rear of the panniers that secures it to the pannier frame plate

Supplied with key, barrel, lock plate, rivets and fitting instructions. Includes pannier frame plate LUA70114

 1 in stock

Replacement top box to rear luggage rack lock for Hepco and Becker Junior top boxes / top cases. This is the lock at the base of the top box which attaches it to the luggage rack

Supplied with key, rivets, lock plate and fitting instructions

 1 in stock

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

 1 in stock

Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.

Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included

 1 in stock

Lightweight M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins). An aluminium filler plug made in Italy.

 1 in stock

 12022600 GU12022600 12 02 26 00
 1202 2600 1202.2600 12.02.26.00

Thick protective tank cover for your workshop. Ideal for preventing expensive damage to your motorcycle tank when working on your bike (avoid brake fluid spills etc...) and also useful for leaving on your bike when not in use to avoid accidental scratches. Special anti-slip material on underside secures cover to your motorcycle tank when in use. Upper side is nylon for ease of cleaning.

 1 in stock

Large dust cover for your bike when parked up in your garage. Prevents dust and dirt settling on your pride and joy. Also useful for hiding your bike from prying eyes when your garage door is open. Also see tank protector SIA00001 for extra protection.

Breathable, tear resistant fabric.

 1 in stock

Black twin pull Tommaselli 2c twist grip. Includes a pair of handlebar grips, for bikes with dual throttle cables from the bars

As originally fitted to Le Mans 1. Not suitable for carbs larger than 36mm (the twistgrip inner will require minor modification to operate PHM40s). This twistgrip can be used on almost any model with suitable custom cables. See ACA14450 for spare rubber. Holes for throttle cable elbow may be smaller than the original and need carefully enlarging with a drill or round file.

 1 in stock

 14603450 GU14603450 14 60 34 50
 1460 3450 1460.3450 14.60.34.50

Replacement brake or gear lever for bikes fitted with Tarozzi rearsets

See ACA30060 for rearset kits

 Availability varies on this part, check availability